How Are Epoxy Dome Golf Ball Markers Made, and What Should You Check?
An epoxy dome is a clear resin coating applied over printed artwork. After curing, it forms a smooth, glossy and slightly raised surface that protects the design underneath. For buyers, the important point is not complicated manufacturing terminology, but whether the artwork, resin surface and finished products are produced consistently.
1. Prepare the Ball Marker Base
Production begins with the ball marker base. The area where the artwork and resin will be applied should be clean and free from dust, oil or other contamination that could affect adhesion or appearance. The exact preparation depends on the marker material, surface finish and production method.
2. Apply the Printed Artwork
The artwork may be printed directly onto the marker surface or produced separately and applied to the marker, depending on the product and production method. At this stage, check the clarity, color, position and edges of the logo, and make sure fine text or small details remain clear at the actual finished size. If you are comparing different decoration options, see our guide to choosing the right finish and logo method for custom golf ball markers.
3. Apply the Clear Resin and Cure
Clear resin is applied over the printed artwork to form the dome. The amount and distribution of resin need to be controlled so the surface is even and the resin does not overflow the intended area. During curing, dust, bubbles and other contamination should be minimized. Once fully cured, the surface should be clear, stable and free from obvious tackiness or signs of incomplete curing.
4. Check the Finished Product
When checking samples or bulk production, look at the clarity and position of the artwork, color consistency, visible bubbles or contamination, dome shape, resin overflow, lifting around the edges and consistency between pieces. For custom orders where small details or exact colors are important, checking a physical sample before bulk production can help confirm the final appearance and reduce misunderstandings. For available styles, finishes and customization options, see our custom golf ball markers page.
Bottom Line
The basic process is simple: prepare the base → apply the printed artwork → add clear resin → cure → inspect.