How to Choose the Right Golf Ferrule
Choosing a golf ferrule does not need to be complicated. For most clubs, start with the shaft tip size, then check whether the club head requires a collared ferrule.
1. Match the Ferrule to the Shaft Tip Size
First, identify the shaft tip size. Common sizes include .335", .355" and .370". The ferrule needs to fit the shaft correctly, so if you are working with a .370 shaft, start with a ferrule designed for that shaft size. Do not choose a ferrule by appearance alone.
2. Check Whether You Need a Collared Ferrule
The next important question is whether the club head is designed for a collared ferrule. A collared ferrule has a small section that extends into the top of the hosel. Some club heads are designed for this type of ferrule, while others use a standard ferrule without a collar. If the original ferrule has a collar, use that as an important reference when choosing the replacement. The shaft tip size alone does not tell you whether a collared ferrule is required.
3. Check the Ferrule Outside Diameter
The ferrule outside diameter should be reasonably close to the outside diameter of the hosel. It does not always need to be an exact match before installation, because a ferrule can be finished after installation to create a smooth transition between the ferrule and hosel. Starting with a reasonably close outside diameter simply makes installation and finishing easier.
4. Use the Original Ferrule as a Reference
If you still have the original ferrule, it is usually the easiest reference. Check the shaft size, whether it has a collar, the approximate outside diameter, and the length and appearance. If the original ferrule fitted the club correctly, choosing a similar replacement keeps the process simple.
Once the shaft size and hosel requirements are clear, you can compare available golf ferrules by inside diameter, outside diameter, length, profile and collar design.
Bottom Line
Choosing a golf ferrule can be simple:
Match the shaft tip size → check whether a collared ferrule is required → make sure the outside diameter is reasonably close to the hosel.
These three checks are usually enough to choose the right ferrule.